Automotive

For the automotive industry, Bond-Laminates offers TEPEX^® dynalite and flowcore materials on the base of cost-effective roving glass with a matrix of PA6 or PP.

Thanks to the integrated continuous fibres the material obtains a high stiffness and a very high strength. It also offers better crash absorption properties than shown in steel or long fibre reinforced plastics. The thermoplastic matrix enables back- or insert molding whereby extremely light applications with a high degree of design freedom can be manufactured in a very short cycle time.

These low cycle times benefit the production of high quantities for the automotive industry.

Application	TEPEX^® Formulation	Functionality
*TEPEX^® dynalite* 104 - Roving Glass/PP**
	TEPEX^® dynalite 104-RG600(x)/47% Roving Glass/PP x = number of layers Thickness in 0.5mm/layer up to 5.0mm	Light Easy to process Can be combined readily with other PP components
	TEPEX^® dynalite 104-RGUD600(x)/47% Roving Glass/PP x = number of layers Thickness in 0.5mm/layer up to 5.0mm	Light Rigid Easy to process Can be combined readily with other PP components
*TEPEX^® dynalite* 102 - Roving Glass/PA6**
	TEPEX^® dynalite 102-RG600(x)/47% Roving Glass/PA6 x = number of layers Thickness in 0.5mm/layer up to 5.0mm	Light Rigid Easy to process Continuous operating temperature 120° C
	TEPEX^® dynalite 102-RGUD600(x)/47% Roving Glass/PA6 x = number of layers Thickness in 0.5mm/layer up to 5.0mm	Light Rigid Easy to process Load-adaptable Continuous operating temperature 120° C
*TEPEX^® flowcore* 102 - Random Glass/PA6**
	TEPEX^® flowcore 102-RGR600(x)/47% Random Glass/PA6 x = number of layers Thickness in 0.5mm/layer up to 5.0mm	Light Geometrically complex shapes obtainable by flow moulding Can be combined with continuous fibre Continuous operating temperature 120° C